Why Did My Geek Bar Stop Working

The Geek Bar is a popular choice among many people in the vaping world. Like all other electronic devices it is not free from issues that prevent it from working as it is supposed to. Having said that, this article is going to discuss all the possible reasons that may cause your Geek Bar not work giving you a complete guide for troubleshooting them and possibly fixing the issue.

1- Battery - The Power Source

1-1 Battery Depletion

The most common reason that a Geek Bar no longer works is because the battery has run out. Geek Bars use rechargeable lithium - ion batteries. As with any part of a battery, your Geek Bar will eventually run out of juice if you have been using it regularly without giving it enough time to charge.

The Geek Bar is normally fitted with a battery status indicator light. A solid - colored light typically means the battery is charging and a blinking light often means the battery is low. If the light doesnt come on at all, this could indicate that the battery is completely dead.

You have to charge your Geek Bar to resolve this issue. Use the supplied charging cable that came with the device. You will simply plug one end into the charging port of the Geek Bar (Usually at the bottom or side of the device) and the other into a USB power source, i.e., computer USB port or wall adapter. The best option is to use a low - voltage USB charger (5V) in order to avoid overcharging or damaging the battery. Give it a charge time of 30 minutes to an hour. During the charging process, see if the indicator light turns on and indicates that the device is charging.

1-2 Charging Issues

So another reason is your Geek Bar not working could also be improper charging. There are various possible reasons this is happening. It is possible that the charging cable is faulty. Inspect the cable for any evidence of wear and tear like frayed wires or a bent connector. If the cable is damaged, it is necessary to replace it.

Another reason could be if the charging port on your Geek Bar is dirty or there is some dust accumulated in it. Over time dust lint or any small particles can build up on the part of the port the cable connects which will prevent a proper connection from ever happening. You can also very gently use a clean dry brush (a toothbrush) to clean the charging port. Be sure to power down the device before cleaning the port.

The input source that you are using to charge the Geek Bar might also be defective. Use a different USB port, or a different wall adapter, on your computer. If you are using a power bank make sure to charge the Geek Bar sufficiently.

2- E - Liquid and Cartridge

2-1 E - Liquid Depletion

The Geek Bar use e - liquid to create vapor. When the e - liquid in this cartridge runs out the device does not produce a vapor. To know if this is the case you need to see the cartridge. Most Geek Bar cartridges are clear in color, so you can easily see the amount of e - liquid they have left inside them. When the e - liquid level is critically low or empty it is time to change the cartridge.

Others are disposable and when the e - liquid reservoir is depleted the whole kit must be disposed of. But if your Geek Bar is a reusable type, then you can buy e-liquid of your choice and refill the cartridge. Make sure to read the manufacturers instructions on how to refill so as to not overfill or spill the e - liquid.

2-2 Cartridge Connection Problems

Even if theres e - liquid in the cartridge a bad connection between the cartridge and the device may prevent the Geek Bar from operating. Cartridge is most likely not correctly inputted into the system. Carefully take out the cartridge and put it back ensuring it clicks into place properly.

There may be a problem with the contacts on the cartridge and the devise. These contacts can get dirty/oxidised over time and not create a proper electrical connection. Gently wipe the contacts on the cartridge and within the device, using a clean, dry cloth. This should allow the connection to work and allow the device to function correctly.

3- Heating Element and Coils

3-1 Coil Burnout

The heating element in the Geek Bar is the coil that heats the e-liquid to form the vapor. The coil will burn and since the coil is the pillar of this device without vaporizing e - liquid. A burned - out coil will have a relatively obvious bad taste. You might also find that the vapor production has significantly dropped off or ceased entirely.

There are a few reasons why your coil may burn out. One such common reason is dry - hitting which occurs when you attempt to take a puff from the device when the e - liquid level is quite low. But without any e - liquid to vaporize the coil heats up and burns. Or, for example, you left your Geek Bar on a high - power setting (if it has a variable power) for too long causing the coil to burn out through overheating.

If you find that the coil has burned out and your Geek Bar has replaceable coils you will have to replace the coil. Replace the coil as per the manufacturers instructions Make sure to use the type of coil suitable for your particular model of Geek Bar.

3-2 Faulty Heating Element

You also may have a more general heating element system failure, other than coil burnout. This could either be a manufacturing defect or a damaged device. If you have already eliminated battery/ e - liquid/ coil issues and your device still does not produce vapor them most likely it is due to problems with the heating element.

General fact and have some more data to the Troubleshooters after all sorts of problems. They can give you additional direction on whether the device is still covered under warranty, and if it can be repaired or replaced.

4- Problems with Hardware and Mechanics

4-1 Button or Sensor Problems

Geek Bars have either a push button on the side of the device to activate the device or a draw - activated sensor. If the button doesn't work properly it could be that dirt or debris has stuck under the button. Try carefully cleaning the area around the button. In case sensor isnt working, it could be obstrurched. This is commonly an obstruction around the air intake or sensor area.

Repairing Physical Damage to the Button or SensorIf the button or sensor is physically damaged, it must be repaired or replaced. This is often a more complicated process and really needs to be done by a professional, particularly if the device is still in warranty.

4-2 INTERNAL WIRING AND CIRCUITRY

Issues with internal wiring and circuitry can also result in the Geek Bar not working. Without ample technical knowledge, these issues can be difficult to diagnose. If you experience any unusual smells sparks or the device seems to be getting hot when you are not using it that can be a sign of an internal wiring or circuitry issue.

Do not try to open or repair the device yourself in such cases because it can be dangerous and also voids the warranty. S7144 Contact the manufacturer or a professional vaping device repair service.

5- Software and Firmware (If any)

Geek Bar Models Some advanced Geek Bars use software or firmware to control the power settings temperature settings and other functions of the device. Corruption of the software or firmware can cause the device to no longer function.

Visit the manufacturers website to see if there are any software or firmware updates for your Geek Bar model. If there are, follow the instructions to update the device. Be sure that the device has enough charge before the update process to prevent problems with the update.

You are then introduced with the option to download the updates or firmware and the software will let you know if there is new software available without the need to connect your device to your computer, improving the convenience of using the central operating system.) If after the updates the video, music or image device still doesn't work, it could indicate a more serious software - related error and you should contact the customer service of the manufacturer for assistance.

Your Geek Bar may have stopped working due to several different reasons. In many cases, you can uncover the problem by methodically testing the battery e - liquid heating element hardware and software (if applicable). If you are unable to repair the issue yourself, you should contact the manufacturer or professional vape device repair service for assistance.

Vape User Feedback Reference

A. If I'm at a craft beer festival, vapes make it even better for me. I can match one vape flavor to a certain beer. It is a perfect flavor combination; a blackcurrant – vanilla vape with a hoppy IPA.

B. I'm an avid hiker and vapes are small and easy to carry. It also prevents me from getting sick on the road of vapors; the mint - eucalyptus vape makes its function with the perfect high-altitude scenery.

C. Variety of Flavors - ECome vapes come in a variety of different flavors. Whether I want a tobacco or something fruity, there is always an option for me.

D. On a shoestring as a traveler Vapes are cost - effective. With refillable tanks and cheap e - liquids I can now enjoy vaping without breaking the bank. It's a nice way for me to unwind when I'm on the road.

E. Being into the tennis court a lot vapes is a perfect way to chill. Its light weight makes it easy to carry, and I can now vape a tennis - court - inspired flavor, like lemon - mint, as I catch my breath. The crisp, citrus - mint taste energizes me for the following match.